Easy Science Project: How To Make a Bouncy Egg

Are you in need of a simple science project that only requires a few household ingredients?  Look no further!  Parents are always telling children not to play with their food, but they’ll make an exception on this one.  Try this fun experiment that turns an egg into a bouncy ball!  The only ingredients required are an egg or two, some vinegar, and a container.

Easy Science Project - How to Make a Bouncy Egg

Step 1: Get a container of vinegar ready. Find a jar or Tupperware container large enough to fit the egg. Grab a bottle of regular white vinegar and fill the jar or Tupperware container with vinegar. Don’t fill it all the way to the brim though, because then putting the egg in will make it overflow.

Step 2: Add dye if you want to color your bouncy egg. You can easily make your finished bouncy egg any color you want to by adding food coloring dye to the vinegar. Just add around 10 drops of the dye to the vinegar, or enough to color the whole container of vinegar.

  • It doesn’t have to be filled to the top but it should be filled high enough so that the egg can be completely submerged in vinegar.

Easy Science Project - How to Make a Bouncy Egg

Step 3: Submerge an egg. Get a raw, unboiled egg. Place the raw egg in the vinegar-filled container. Just drop it in from right above the vinegar so the vinegar doesn’t splash everywhere. Make sure it is completely submerged.

Easy Science Project - How to Make a Bouncy Egg

Step 4: Cover the container. Place a lid on your container and leave it somewhere safe but out of the sun. The less sunlight it gets the better, so either put it somewhere dark like a closet, or cover it with something like a kitchen cloth.

Easy Science Project - How to Make a Bouncy Egg

Step 5: Wait for the shell of the egg to completely dissolve. This process can take anywhere from 24 to 72 hours. To be on the safe side, wait three days before continuing.

Easy Science Project - How to Make a Bouncy Egg

Step 6: Check the egg. Look at the egg through the container every once and a while to check its progress. The egg will turn a transparent color because the eggshell is decreasing in thickness. The eggshell will soon dissolve, leaving a thick strong egg white.

  • The reason the shell dissolves is because vinegar is a weak acid. The egg shell is made of calcium carbonate. When the shell meets vinegar, it makes a chemical reaction that turns the calcium carbonate into carbon dioxide, which is what those bubbles in the container are.

Step 7: Remove the egg. Take the egg out of the vinegar carefully. Just reach in and pull it out with your hand. Don’t forget to wash your hand afterwards. Place the egg on a couple of paper towels to let it drain.

  • Be extra careful when handling a raw bouncy egg. It will be more fragile than a boiled bouncy egg.

Easy Science Project - How to Make a Bouncy Egg

Step 8: Bounce it. Make sure it’s dry first. You can speed this up by drying it by hand with a paper towel. Be careful not to drop it from too high of a height, as it can still break and leave a mess. Start with just a few inches, and have cleaning supplies ready!

If you enjoyed this project and are looking for more science-related entertainment, be sure to check out jmcremps.com for a great selection of science kits, science books, and loads of other fun, exciting, and educational items!

The instructional portion of this article was provided by wikihow, a wiki building the world’s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How To Make A Bouncy Egg. Content on wikiHow can be shared under a Creative Commons License.

Advertisements

At Home Science Experiment for Kids – How to Make a Cloud in Bottle!

Who needs to look up in the sky to gaze at the cloud formations when you can make your own cloud that you can hold in your hand.  All you need is a plastic soda or water bottle and a few common household items. Try this easy at-home science experiment and create your own cloud in a bottle.  It’s easy, fun, and educational.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-17

1. Assemble your supplies. Have your supplies on hand before you start on this experiment. You will need:

  • Plastic bottle with a cap: A 2-liter soda bottle is ideal for this experiment. Make sure to remove the label from the plastic bottle. Then you will be able to see the clouds when they form inside the bottle. It is also best to choose a clear bottle.
  • Matches
  • Water

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-18

2. Pour hot water into the bottle. Use hot water from the tap. Pour in enough water to cover the bottom of the bottle (about 2 centimeters).

  • Don’t use boiling water in a plastic bottle. The plastic might warp and the experiment won’t work. The water should be hot, though. Try for about 130 degrees Fahrenheit.
  • Swirl around the water a bit to warm up the sides of the bottle.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-19

3.  Strike a match. Blow it out after a few full seconds. Make sure an adult is assisting you with this step.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-20

4.  Toss the burned match into the bottle. Tilt the bottle with one hand and insert head of the match into the top of the bottle. Let the smoke from the match fill the bottle. , where it will seem to disappear. Discard the match.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-21
5. Screw the cap onto the bottle. Grip the neck of the bottle so that you do not squeeze the sides before the cap is screwed in completely. This prevents any smoke or air from escaping.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-22

6.  Squeeze the sides of the bottle hard. Do this three or four times. Wait a few seconds then squeeze the bottle again, this time holding the squeeze longer before releasing.

aid41840-728px-Make-a-Cloud-in-a-Bottle-Step-23

7. Look at the formation of fog in the bottle. You should see your very own cloud there! Putting pressure on the bottle’s sides forces the water particles to compress. When you let go of the sides of the bottle, the air expands, decreasing the temperature. When the air cools, the particles can stick together a little more easily, which causes them to clump into little tiny droplets around the smoke molecules.

This mimics the process of clouds forming in the sky. Clouds in the sky are made up of water droplets that have clung to tiny particles of dust, smoke, ash, or salt.

Science Experiment Tips

  • Experiment with how many times and how hard you squeeze the bottle.
  • If you do not have matches, you can use a lighter and a piece of paper or an incense stick to make the smoke that you need.
  • Experiment with adding a few drops of rubbing alcohol to the water (distilled liquor also works) to make a more visible cloud.
  • Use adult supervision when lighting and handling the match if you’re a child.

For more fun experiments, visit jmcremps.com science department where you’ll find all kinds of science experiments, science kits, and science books.

The instructional portion of this article was provided by wikiHow, a wiki building the world’s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Make a Cloud in a Bottle.  Content on wikiHow can be shared under a Creative Commons License.

A Sweet Science Treat Every Kid Will Love – At Home Science Experiment for Kids

This edible science experiment kit for kids is fun, educational and yummy too.
This edible science experiment kit for kids is fun, educational and yummy too.

Science can be fun, science can be messy, and science can be sweet.  Yes, I said sweet.  Not every kid is a natural chemistry lover, but aren’t all kids natural treat lovers?  The minute you mix science and sweets together you will be amazed at how your “do we have to do science” child can change into a “can we do that science experiment now” child.  Best of all, it’s the perfect way to extend the Valentine’s Day love.  Make some candy (in the name of science, of course), and then share it with the ones you love! Win-Win!

The Candy Chemistry Set from the at-home science experiment experts, Thames & Kosmos, is our top pic for sweet science experiments.  The kit includes over 25 tasty experiments and has everything you and you’re young Einsteins need to make mouth-watering treats.  Together you’ll explore the worlds of math, chemistry and physical science.  Best of all, this kit receives rave reviews from kids and parents alike because it is fun, educational and easy to use.

The one science experiment you can eat when you're done!
The one science experiment you can eat when you’re done!

•Use this educational science kit to discover why sugar crystallizes to make rock candy.
• Study the phases of matter and discover specific heat as you melt chocolates and pour them into molds.
• Learn to use a thermometer as you cook hard candy from sugar.
• Practice measuring and conversions.
• Investigate the chemistry of gummy bears. Yum!
•And, the bonus…. discover the mysterious phenomenon of triboluminescence with wintergreen candies.  (You may not even know what that is yet, but trust us – it’s cool!)

As cool as this at home science experiment for kids is, it has one advantage few other science kits can claim. With this kit, you can eat your experiment when you are done!  This kit is recommended for ages 10 and up.

Check out all the other awesome science experiments for kids at jmcremps.com.

How to Blow up a Balloon With Baking Soda and Vinegar – At Home Science Experiments for Kids

It’s easy to make science fun and exciting with this simple science experiment you can do at home.  All you need are a few supplies and a willing helper or two.  This simple experiment will demonstrate the process of a chemical reaction.  Here are the supplies you will need:

Fill a balloon the fun way!
Blow up a balloon the fun way!
  • Ballon
  • White Vinegar
  • Baking Soda
  • Empty plastic bottle with a narrow neck
  • Funnel

1.  Pour a little vinegar into a plastic bottle. Choose a plastic water bottle, or another bottle with a narrow neck. Pour 1–2 inches (2.5–5 cm) of vinegar into the bottle, using a funnel if you have one. Use white vinegar, also called distilled vinegar, for the best result.

2.  Use a funnel or straw to put a little baking soda into a limp balloon. You can use any shape and color of balloon. Hold it loosely by the neck, with the open side of the balloon facing towards you. Fit a funnel into the neck if you have one, then pour about two tablespoons (30 mL) baking soda into the balloon, or just fill the balloon about halfway full.

3.  Stretch the neck of the balloon over the top of the bottle. Be careful not to spill the baking soda while you do this. Hold the balloon’s neck with both hands and stretch it over the top of the plastic bottle containing vinegar. Have a friend keep the bottle steady if the table or bottle is wobbly.

4.  Lift the balloon up over the bottle and watch the reaction. The baking soda should fall out of the balloon, through the neck of the bottle, and into the vinegar at the bottom. Here, the two chemicals will fizz and react, turning into other chemicals. One of these is carbon dioxide, a gas, which will rise up and inflate the balloon.  Shake the bottle gently to mix the two ingredients if there’s not much fizzing.

5.  If it doesn’t work, try again with more vinegar or baking soda. If the fizzing has stopped and the balloon still hasn’t inflated after you count to 100, empty out the bottle and try again with more vinegar and baking soda. The stuff left in the bottle has turned into other chemicals, mostly water, so it can’t be used again.  Don’t go overboard. The bottle should never be more than about 1/3 full of vinegar.

HOW IT WORKS – THE SCIENCE BEHIND THE FUN

Depending on the age and interest of your young experimenters, you can use this simple at-home science experiment to introduce any of the following principles:

Understand chemical reactions. Just about everything around you is made up of molecules, or different types of substances. Often, two kinds of molecules react with each other, breaking up and forming different molecules out of the pieces.

Learn about baking soda and vinegar. The reactants, or substances that reacted with each other in the fizzy reaction you saw, are baking soda and vinegar. Unlike many ingredients in your kitchen, both of these are simple chemicals, not complicated mixtures of many chemicals:

  • Baking soda is another word for the molecule sodium bicarbonate.
  • White vinegar is a mixture of acetic acid and water. Only the acetic acid reacts with the baking soda.

Read about the reaction. Baking soda is a type of substance called a base. Vinegar, or acetic acid, is a type of substance called an acid. Bases and acids react with each other, partially breaking apart and forming different substances. This is described as “neutralization” because the end result is neither a base nor an acid. In this case, the new substances are water, a kind of salt, and carbon dioxide. Carbon dioxide, a gas, leaves the liquid mixture and expands throughout the bottle and the balloon, inflating it.

  • Although the definition of acid and base can get complicated, you can compare the differences between the original substances and the “neutralized” result to see there are obvious changes. For instance, vinegar has a strong smell and can be used to dissolve grime and dirt. After being mixed with baking soda, it smells much less strongly and is no more effective at cleaning than water is.

Study the chemical formula. If you’re familiar with some chemistry, or curious about how scientists describe reactions, the formula below describes the reaction between sodium bicarbonate NaHCO3 and acetic acid H C2H3O2(aq)NaC2H3O2.[4] Can you figure out how each molecule splits apart and reforms?

  • NaHCO3(aq) + HC2H3O2(aq) → NaC2H3O2(aq) + H2O(l) + CO2(g)
  • The letters in parentheses show the state the chemicals are in during and after the reaction: (g)as, (l)iquid, or (aq)ueous. “Aqueous” means the chemical is dissolved in water.

JM Cremps carries a complete line of fun and exciting at-home science experiments for kids. They carry science kits and science experiments for every age.  The My First Super Science Kit is perfect for the younger scientists.  As your scientist gets older and more knowledgeable, our Chemistry Kits,  Snap Circuits Snaptricity Kits, and our Build Your Own Combustion Engine Kit are a few of our favorites.

The instructional portion of this article was provided by wikiHow, a wiki building the world’s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Blow Up a Balloon with Baking Soda and Vinegar. Content on wikiHow can be shared under a Creative Commons License.

What Can You Do With a Robotic Kit from JM Cremps? A lot more than you think!

At JM Cremps we carry a wide range of science kits and science experiments for kids.  Our kits range from Chemistry and Physics kits, to AM/FM radio kits, engineering kits, and even kits to build your own Robot.  We know that our science kits are pretty cool, but when a customer recently explained to us just what he accomplished with one of our kits, we realized that they are even more fun and exciting than we had originally imagined.

Robotic Arm Edge Kit
Science kits can open up new avenues of possibilities and technologies for the next generation of engineers, scientists, artists, and creators.

The Robotic Arm Edge Kit is way more than just a toy.  This kit was used recently in a graduate project to create a muscle-controlled prosthetic limb.  This EMG Controlled Prosthetic Limb is some pretty advanced science, but the results are simply amazing.  What the graduate students did was to take the Robotic Arm Edge Kit, and instead of hooking up the wires and electrodes to the control box, they hooked up the wires to the muscles in their arms and upper body.  When they flexed their muscles, the electrical impulse in the muscle sent a signal through to the robotic arm that in turn caused the robotic arm to move.

Experiments such as this are on the forefront of new technological advancements in prosethetic limbs.  It’s encouraging to know that what we carry as “kits” or “toys” are also used in such promising applications.

The Robotic Arm Edge Kit
The Robotic Arm Edge Kit is more than just a toy!

Make Your Own Potato Powered Clock – Science Projects for Kids

Baked potatoes, mashed potatoes, French fries and homemade clocks, what do they have in common?  They all start with potatoes!  That’s right, potatoes don’t just provide you with energy when you eat them, thy will also power a clock. This is an easy, at-home science project that will demonstrate how we can supply our energy needs in ways other than just flipping the switch on the wall. Potato clocks are fun and easy to assemble, but first you’ll need to gather some basic supplies.

  • 2 large clean potatoes, or 2 halves of a large potato.
  • 2 galvanized nails (zinc)
  • 2 copper nails or wires
  • 3 jumper wires (with alligator clips on each end)
  • A Battery operated LCD clock (gray display with black numbers, like a cheap watch, normally taking just one 1.5V battery)

The nails, copper nails, or copper wire, can be found at most hardware stores.  Most hardware stores also carry jumper wires with alligator clips, but if yours doesn’t they can also be found at electronics stores.  If you are having trouble finding supplies, JM Cremps carries the complete Potato Clock Kit along with other science projects for kids.

First, assemble the items you need, and then let’s get started!

Step 1:  Separate the two potatoes. Each potato works as a “galvanic cell,” releasing electrical energy through chemical reactions.[1] Call one potato A (or 1), and the other potato B (or 2).

Make Your Own Potato Clock - At Home Science Project for Kids step 1
Here’s the Science:  The bulk of the potato just serves as a case for the cell, holding everything in position. The potato juice serves as the “electrolyte,” in which charged atoms and molecules called “ions” dissolve and can flow over time. The dilute phosphoric acid in it also provides hydrogen ions for the reaction.
Some atoms (or molecules) strongly attract extra electrons and become negatively charged ions, called onions (“an-ions”); others are easily stripped of some electrons and become positively charged “cations” (“cat-ions”). Each element attracts electrons with different force, due to the differing charge of protons with which their nucleus attracts electrons and the manner in which the marginal “valence” electrons arrange themselves around the nucleus and other electrons. The potato juice has dilute phosphoric acid, some of which dissolves dissociated into as hydrogen cations (basically) and phosphate anions.

Step 2:  Place one galvanized nail in each potato.

Make Your Own Potato Clock - At Home Science Project for Kids step 2

Step 3: Place one copper nail or wire piece into each potato ensuring that the nails don’t touch.

Make Your Own Potato Clock - At Home Science Project for Kids step 3
At this stage it is really important to understand that this experiment will work only if the galvanized nails and the copper nails/wire are as far apart as possible on the potato because the distance between them is what generates the power.

Step 4: Remove the battery compartment lid from the clock.

Make Your Own Potato Clock - At Home Science Project for Kids step 4
If there is already a battery in it, remove it. Take notice of the battery’s polarity in relation to how it connects to the clock.

Step 5: Connect the first jumper wire from the copper nail or wire of potato A to the positive terminal of the clock.

Make Your Own Potato Clock - At Home Science Project for Kids step 5
To do this, take one jumper lead and attach the alligator clip to the copper nail or wire and then the other end’s alligator clip to the positive terminal (denoted by the symbol + ).

Step 6: Connect the second jumper wire from the galvanized nail of potato B to the negative terminal of the clock, denoted by the symbol “-“.

Make Your Own Potato Clock - At Home Science Project for Kids step

When you stick the zinc electrode (the plating on the galvanized nail) and the copper electrode (the copper nail or wire) in the potato, each metal, having less electron affinity than the hydrogen ions, would tend to have its atoms stripped of their electrons by the hydrogen ions. The neutral hydrogen atoms would join together into hydrogen gas molecules and escape; the metal cations would tend to disperse away and more hydrogen diffuse in to continue the reaction slowly bubbling away the acid’s hydrogen and consuming the metals.  Zinc has even less electron affinity than copper. So, if you connect the electrodes with a conductor, the wire, some electrons will tend to flow in it from the zinc to the copper. The removal of some electrons from the zinc electrode will make a few of its atoms fall off as cations and be dissolved away. The excess of electrons at the copper will make hydrogen preferentially take them up there, but also tend to make the copper keep its electrons and not be corroded (or, more precisely, shift the reaction equilibrium so that the copper ions that do fall off tend to regain electrons and reattach for little or no net corrosion). The removal of electrons from the copper and the addition of electrons to the zinc would tend to build up areas of electric charge that would retard the reaction. But more electrons keep conducting through the wire, and more hydrogen and zinc ions keep dispersing through the potato to maintain fresh solution at each electrode, to keep the reaction going. The force with which the copper thus draws the electrons can be used to do work, like run a clock.

Step 7: Connect the third jumper wire to the galvanized nail of potato A.

Make Your Own Potato Clock - At Home Science Project for Kids step 7
Then connect its other end to the copper nail of potato B. By this stage all three jumper leads are interconnected and the clock should be functioning.

Step 8: Check the clock.

Make Your Own Potato Clock - At Home Science Project for Kids step 8
The reaction slows as the zinc metal and the hydrogen ions are depleted. The force with which the hydrogen pulled the electrons off the zinc, in a very roundabout way, is what the cell makes available to you for work–with a little being “wasted”, of course.
Wiring the potato cells end-to-end makes a “series circuit”, pulling the stream of electrons through the clock with twice as much force as one potato would apply. It also makes them properly called a “battery”, because you’re using more than one electrochemical “cell”.
Once it’s working, why not set the time on the clock to the current time!
If the clock doesn’t work, check that all connections are secure and in the right order, and double-check the polarity of the clock. If it still doesn’t work, your clock might require more power than the very little a vegetable battery can provide. You can satisfy yourself that the battery is producing some electricity with a multimeter and measuring its voltage (electrical pressure) and current (electrical flow, amps). If you have to choose scales, choose very low ones: these batteries produce a volt or two and a few milliamps.

Click here to see the animated version of these instructions.

The instructional portion of this article was provided by wikiHow, a wiki building the world’s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Make a Potato Clock in 9 Steps. Content on wikiHow can be shared under a Creative Commons License.

Erupt Your Own Giant Soda Geyser – At Home Science Experiment for Kids

This fun science experiment for kids is easy, exciting, and brings “oohs” and “aahs” from everyone around.   It’s easy to do – just drop the mentos into the bottle of soda and watch the eruption!  This experiment is as exciting as Fourth of July fireworks with the added benefit of a mini science lesson.

Soda Geyser Tube At Home Science Experiments for Kids
Think how much fun they’ll have erupting a bottle of soda!

What exactly will your kids learn from this dramatic experiment? They’ll learn that a chemical reaction occurs when two substances combine to form a new substance.   If you explain this concept to them before the experiment, they will see with their own eyes this simple and amazing transformation.   In this case, the demonstration will be the most valuable part of the lesson.

You will need:

One 2-liter bottle of diet soda
One package of Mentos mint candy
One empty toilet paper roll

Step 1:  Slice the toilet paper roll lengthwise so that it fits into mouth of the soda bottle.  This creates a tube that will allow you to drop the entire package of Mentos into the bottle at one time.

Step 2:  Slide all of the Mentos through the soda tube – and RUN!  In an instant, the chemical reaction will begin to take place between the candy and the soda, and your soda bottle will shoot a geyser into the air up to 25 feet high!

TIPS:  Do this kids science experiment outside – otherwise, your house will never be the same again!  Also, you can use regular soda, but diet soda works a little better and doesn’t leave a sticky mess behind.

To make this experiment go off without a hitch, pick up the Geyser Tube kit.  It contains a package of mentos and a special tube that makes quick work of adding the mentos to the soda.  (No cutting toilet paper rolls here!)  At under six dollars, it’s a good deal because the tube can be used over and over again.

At home science experiments like this one are not only exciting for your kids, they can help to foster a life long love of science.   JM Cremps carries many home science experiments kits for kids of all ages.  Our Gravity Goo Science Experiments for Kids kit allows them to create a special goo that will defy gravity right before their very eyes.  If launching rockets is more in line with your child’s way of thinking, then the Pop Top Rockets Kit will really intrigue them.  If engines and electronics are more popular at your house, then the “Build Your Own Internal Combustion Engine” Kit is a great tool for your youngsters to learn the basics of a modern engine.   The kit contains everything they’ll need to build a complete working engine and includes detailed instructions for every step of the process.

Science Experiments For Kids – The Big Bag of Science Product Review

Big Bag of Science - Science Experiments for Kids
The Big Bag of Science has over 70 science experiments for kids!

Calling all science lovers, adventure seekers, and mess-makers!  This is the kit for you!  It’s loaded with the materials needed to create some of the coolest science experiments for kids.  You can make snow, erupt a geyser, cause a tornado, and make water disappear – all in the name of science.  Mom and Dad will be happy too, not because you’ve turned the kitchen into a lab, but because you’re learning and not just playing.

The Big Bag of Science has everything you need to complete over 70 science experiments for kids right in your own kitchen.  You’ll get hands-on experience in many of the sciences – physics, chemistry, biology, weather, earth science, life science, physical science, magnetic fields, geology, aeronautics, and more!  This set is recommended for kids 8 years old and up, but younger children love to be involved too, as long as they have an adult to guide them.

We aren’t the only ones who love the Big Bag of Science.  This kit has won many awards, including the National Parenting Seal of Approval for 2011!  It has also received both the Best Toys for Kids for 2011 from the American Specialty Toy Retailing Association, and the 2011 Best Toy Award from Learning Express.  This product was even featured on the Today Show on NBC as one of the “must-have toys for kids”!

Watch the Today Show product review of the Big Bag of Science.

Some of the experiments show you how to:

You can get a preview of many of the experiments included in this kit by watching the videos from Be Amazing Toys (the creators of the Big Bag of Science).   Just click on the word “WATCH” in the list above for each experiment you’d like to see in action.

Note to parents:  This science kit is filled with incredible, yet simple experiments that will help instill a lifetime love of science in your kids.  However, we advise a little oversight on your part because things tend to get a little messy otherwise.

Encourage a Curious Mind with this Simple Kids Science Experiment at Home

Why is the sky blue? What makes a wheel turn? How do airplanes fly?  These questions show a kid’s natural curiosity of the world around them. Science is an excellent tool to help kids strategically find the answers to their many questions. Here at JM Cremp’s, we specialize in developing the adventurous and inquisitive minds of children. We highly recommend these great science kits for kids and simple science projects to encourage the learning process.

Science experiments don’t have to be complicated or expensive. This simple science project for kids uses materials that are found in most kitchens and can be completed in a few minutes. It is easy and safe, so it is perfect for kids of all ages.  So call in the little mad scientists and let’s get started.

The 3 Layer Float

Have you ever wondered why wood floats and rocks sink? The answer is density. Density is simply the measurement of how solid something is. This experiment will show the different density of 3 substances and 3 objects.

Materials for Kids Science Project
Materials for Kids Science Project

Gather Your Materials:

  • Oil
  • Water
  • Honey
  • Grape
  • Coin
  • Cork
  • Tall Clear Cup

Note: Corn syrup will work as a substitute for honey. Don’t have a cork handy? Try a small piece of wood or a leaf instead.

Procedure for kids science experiment at home
Procedure for kids science experiment.

Begin the Science Experiment Procedure:

1.    Fill 1/3 of the tall clear cup with honey.
2.    Fill the next third with oil.
3.    Fill the last third with water.
4.    Wait a minute and let all three substances settle.
5.    Carefully drop in the coin, then the grape and then the cork.

Results for science project for kids
Results for kids science project.

Results and Observations:

Answer these questions as you make your observations:

1.    What layer is the water?
2.    What substance settled on top?
3.    What happened to the coin?
4.    What happened to the grape?
5.    What happened to the cork?

Now that you have made your observations it’s time to determine the results. Discuss these questions to reach a conclusion:
1.    What substance has the highest density? (bottom liquid)
2.    What substance has the lowest density? (top liquid)
3.    What object has a higher density than honey?
4.    What objects have a higher density than water?
5.    What object has the lowest density?

For a little extra fun, stir the contents of the glass and watch what happens!
Download printable kids science project here.

We think the words learning and fun should always be in the same sentence. From mechanical science to chemistry, kids science activities are a great way to keep the fun in learning.  If you are a homeschooling family, this is a great family science experiment since you can involve both younger and older students.