Tag: Duck Tape Project

Duct Tape Project- How to Make a Duct Tape Rose

jmcrempsLeave a comment

The only thing sweeter than a hand picked rose is a custom, handmade Duct Tape rose. This fun craft makes for an impressive and unique gift or decoration; either alone or as a whole bouquet.

There are different variations of Duct Tape roses.  Some require a little more experience than others, but they all require the same materials:

  • Duct Tape (at least 2 different colors)
  • Wire, pen, or drinking straw
  • Scissors
  • Ruler

Method 1: The Simple Duct Tape Rose

1. Gather your materials. You’ll need duct tape and a ruler to make the petals of the rose. You’ll also need a craft stick or a straw, whichever you prefer, to make the stem. Using a craft stick will create a sturdier stem, but choose the items you have on hand. You’ll also need some scissors if you prefer to cut your tape instead of rip it.
1. Gather your materials. You’ll need duct tape and a ruler to make the petals of the rose. You’ll also need a craft stick or a straw, whichever you prefer, to make the stem. Using a craft stick will create a sturdier stem, but choose the items you have on hand. You’ll also need some scissors if you prefer to cut your tape instead of rip it.
2. Tear a 2 x 2 inch (5 x 5cm) square of duct tape. It doesn't have to be exact, but it should be approximately the size mentioned. However, if you want all of your petals to be the same size, feel free to use a ruler to measure 2 inches (5 cm) of width and height. Then, rip or cut off the piece.
2. Tear a 2 x 2 inch (5 x 5cm) square of duct tape. It doesn’t have to be exact, but it should be approximately the size mentioned. However, if you want all of your petals to be the same size, feel free to use a ruler to measure 2 inches (5 cm) of width and height. Then, rip or cut off the piece.
3. Fold the right corner down toward the bottom left corner. But, do not extend it all the way to the opposite corner. Leave about a quarter of an inch of the sticky underside showing so that the border is framing each side. Again, it doesn’t have to be an exact measurement.
3. Fold the right corner down toward the bottom left corner. But, do not extend it all the way to the opposite corner. Leave about a quarter of an inch of the sticky underside showing so that the border is framing each side. Again, it doesn’t have to be an exact measurement.
4. Fold the left corner down flush with the other corner. Match up the top left corner with the right corner so that they are flush with each other. None of the sticky underside should be showing. As with before, approximations are fine, and it is okay if the corners are not lined up perfectly.
4. Fold the left corner down flush with the other corner. Match up the top left corner with the right corner so that they are flush with each other. None of the sticky underside should be showing. As with before, approximations are fine, and it is okay if the corners are not lined up perfectly.
5. Make seven more petals. Continue in the same fashion as in steps two, three and four to make additional petals to fill out your rose. All of them should be approximately the same size. If if you want a small rose, only make about seven more. But if you want a bigger rose, make about 14 more petals to add some fullness.
5. Make seven more petals. Continue in the same fashion as in steps two, three and four to make additional petals to fill out your rose. All of them should be approximately the same size. If if you want a small rose, only make about seven more. But if you want a bigger rose, make about 14 more petals to add some fullness.
6. Wrap the petal around the drinking straw or craft stick. Turn the petal so that the pointy end of the petal sticks up when it is wrapped around the stick. If need be, turn it on an angle to orient it like at an angle. If you continue in this fashion, it creates the appearance of a rose opening.
6. Wrap the petal around the drinking straw or craft stick. Turn the petal so that the pointy end of the petal sticks up when it is wrapped around the stick. If need be, turn it on an angle to orient it like at an angle. If you continue in this fashion, it creates the appearance of a rose opening.
7. Continue to lay the petals over each other. Repeat steps 1-4 by wrapping the petals around the stick in the same direction as before. After wrapping all of the petals, you will see that they have formed into a rose. Bend the petals to make them fluff out as much as you want.
7. Continue to lay the petals over each other. Repeat steps 1-4 by wrapping the petals around the stick in the same direction as before. After wrapping all of the petals, you will see that they have formed into a rose. Bend the petals to make them fluff out as much as you want.
8. Rip off enough duct tape to cover the rest of the craft stick. Seven to 8 inches (17.78 cm - 20.32 cm) should be plenty. Then, place the top left corner of the tape on the bottom of the rose and start to wrap it diagonally around the craft stick. Wrap it all the way down the stem until the rest of the straw or craft stick is covered in duct tape. To sturdy the rose, rip off an one inch (2.54 cm) section of duct tape, and wrap it vertically around the bottom of the rose and the top of the stick.
8. Rip off enough duct tape to cover the rest of the craft stick. Seven to 8 inches (17.78 cm – 20.32 cm) should be plenty. Then, place the top left corner of the tape on the bottom of the rose and start to wrap it diagonally around the craft stick. Wrap it all the way down the stem until the rest of the straw or craft stick is covered in duct tape. To sturdy the rose, rip off an one inch (2.54 cm) section of duct tape, and wrap it vertically around the bottom of the rose and the top of the stick.

Method 2: Making a Fuller Rose

1. Gather your materials. You’ll need duct tape and a ruler to make the petals of the rose. You’ll also need a craft stick or a straw, whichever you prefer, to make the stem. Using a craft stick will create a sturdier stem, but choose the items you have on hand. You’ll also need some scissors if you prefer to cut your tape instead of rip it.
1. Gather your materials. You’ll need duct tape and a ruler to make the petals of the rose. You’ll also need a craft stick or a straw, whichever you prefer, to make the stem. Using a craft stick will create a sturdier stem, but choose the items you have on hand. You’ll also need some scissors if you prefer to cut your tape instead of rip it.
2. Cut a piece of duct tape long enough to cover the stick, straw or pen. Ten inches (25.4 cm) is a good size. Roll the tape lengthwise sticky-side up around the wire, straw or pen. If you are using a pen, just tape around the outside until everything except for the tip of the pen is completely covered.
3. Tear a 2 inch (5.08 cm) piece of tape. Again, it doesn’t need to be exact. Fold the top right corner down so that the point touches the midpoint of the square. Leave the sticky side of adhesive showing on the side and bottom. Then repeat with the other corner.
4. Fold the left corner down so that it touches the midpoint of the square. (These are the classic first two steps in making a paper airplane.) The two folded down corners should look like a triangle, and below it there should be about 1/2 an inch (2.54 cm) of the adhesive side showing on the bottom.
5. Make about 79 petals to make a really full rose. If you don't want it to be as full, opt for 50 or 60 petals. Follow the same process as in steps two, three and four. So, all of the petals should be approximately the same size and shape.
5. Make about 79 petals to make a really full rose. If you don’t want it to be as full, opt for 50 or 60 petals. Follow the same process as in steps two, three and four. So, all of the petals should be approximately the same size and shape.

 

6. Wrap the petal around the drinking straw or craft stick. Turn the petal so that the pointy end of the petal sticks up when it is wrapped around the stick. If need be, turn it on an angle to orient it like at an angle. If you continue in this fashion, it creates the appearance of a rose opening.
6. Wrap the petal around the drinking straw or craft stick. Turn the petal so that the pointy end of the petal sticks up when it is wrapped around the stick. If need be, turn it on an angle to orient it like at an angle. If you continue in this fashion, it creates the appearance of a rose opening.
7. Add a second row of a few more petals. But, this time spread the petals out more by not wrapping them as tightly. Continue to wrap the petals around the stem to form each layer of petals. Stop when you have reached your desired fullness.
7. Add a second row of a few more petals. But, this time spread the petals out more by not wrapping them as tightly. Continue to wrap the petals around the stem to form each layer of petals. Stop when you have reached your desired fullness.
8. Add a third row of a few more petals. But, this time spread the petals out more by not wrapping them as tightly. Continue to wrap the petals around the stem to form each layer of petals. Stop when you have reached your desired fullness.
8. Add a third row of a few more petals. But, this time spread the petals out more by not wrapping them as tightly. Continue to wrap the petals around the stem to form each layer of petals. Stop when you have reached your desired fullness.
9. Make a leaf in the stem color. You’re going to make a leaf to hide the seam between the rose and the stem. Repeat steps 3 and 4 with duct tape the same color as the stem to make the leaf. Then, stick it under the rose to cover the place where the rose and stem meet. Make two leaves.
9. Make a leaf in the stem color. You’re going to make a leaf to hide the seam between the rose and the stem. Repeat steps 3 and 4 with duct tape the same color as the stem to make the leaf. Then, stick it under the rose to cover the place where the rose and stem meet. Make two leaves.

Method 3: Making a Long Stem with Leaves

1. Select the material that best suits your rose. Craft sticks are sturdier, but wires allow more flexibility in the stem and the leaves. If you are creating a heavier rose, such as in method two, you might want to opt for the craft stick. But if your rose is smaller with fewer petals, such as the “simple rose,” then the wire will do just fine.
1. Select the material that best suits your rose. Craft sticks are sturdier, but wires allow more flexibility in the stem and the leaves. If you are creating a heavier rose, such as in method two, you might want to opt for the craft stick. But if your rose is smaller with fewer petals, such as the “simple rose,” then the wire will do just fine.
2. Cut a long piece of wire to about 10 to 12 inches (25.4 cm). If you are using a craft stick, use the longest craft stick you can find. Or, tape two together. Put two sticks next to each other with about 2 cm (0.787 inches) overlapping. Then, put a small piece of duct tape less than two inches (5.08 cm) over it to secure it. You can cover the seam later. To make it look more natural, cut one of the craft sticks to about 2 inches. Then, overlap them and tape them together in the method previously mentioned.
2. Cut a long piece of wire to about 10 to 12 inches (25.4 cm). If you are using a craft stick, use the longest craft stick you can find. Or, tape two together. Put two sticks next to each other with about 2 cm (0.787 inches) overlapping. Then, put a small piece of duct tape less than two inches (5.08 cm) over it to secure it. You can cover the seam later. To make it look more natural, cut one of the craft sticks to about 2 inches. Then, overlap them and tape them together in the method previously mentioned.
3. Tear off a piece of duct tape long enough to cover the stem. So, if your wire is 10 inches, rip off at least that much. Placing the upper left corner of the tape at a diagonal wrap the duct tape around the wire.The seams should be diagonal as you wrap them around the stem. Use the same method for the craft stick. Rip off enough duct tape to cover your stem and wrap it.
4. Cut a strip of duct tape about four inches (10.16 cm) long. Fold it over on itself. Then, cut a leaf shape. The shape should be an oval shape with a point at the top and the bottom, which is a typical leaf form. If you need assistance, use a template online.
4. Cut a strip of duct tape about four inches (10.16 cm) long. Fold it over on itself. Then, cut a leaf shape. The shape should be an oval shape with a point at the top and the bottom, which is a typical leaf form. If you need assistance, use a template online.
5. Pinch the base of the leaf. When you do this, the sides of the leaf should curl and the point should fold over on itself. With a small piece of tape about an inch (2.54 cm) long and a centimeter (0.393 cm) wide, wrap tape vertically around the base of the leaf so that it remains curved like when you pinched it. This effect makes the leaf look more real. Cut four more leaf shapes and fasten their bottoms with thin strips of duct tape as previously mentioned.
5. Pinch the base of the leaf. When you do this, the sides of the leaf should curl and the point should fold over on itself. With a small piece of tape about an inch (2.54 cm) long and a centimeter (0.393 cm) wide, wrap tape vertically around the base of the leaf so that it remains curved like when you pinched it. This effect makes the leaf look more real. Cut four more leaf shapes and fasten their bottoms with thin strips of duct tape as previously mentioned.
6. Attach the leaves to the stem. Place a leaf with the folded part facing the stem of the rose against the wrapped wire or stick. Then wrap a skinny piece of tape about an inch (2.54 cm) long and a centimeter (0.393 cm) wide along the stem to secure it. -If you have used two craft sticks taped together, place a leaf over the seam where the two sticks overlap and secure it with a small piece of tape as previously mentioned. -If the sticks meet at the end of the stick, designate that end as the top of the rose stem near the flower. -Attach all the other leaves in a similar fashion.
6. Attach the leaves to the stem. Place a leaf with the folded part facing the stem of the rose against the wrapped wire or stick. Then wrap a skinny piece of tape about an inch (2.54 cm) long and a centimeter (0.393 cm) wide along the stem to secure it.
-If you have used two craft sticks taped together, place a leaf over the seam where the two sticks overlap and secure it with a small piece of tape as previously mentioned.
-If the sticks meet at the end of the stick, designate that end as the top of the rose stem near the flower.
-Attach all the other leaves in a similar fashion.
7. Attach your rose petals to the stem in the methods mentioned in the earlier sections. In other words, make your long stem first, then roll your first layer of petals on the stem. Allow the other layers to flare out slightly. Keep adding petals until you have reached your desired fullness.
7. Attach your rose petals to the stem in the methods mentioned in the earlier sections. In other words, make your long stem first, then roll your first layer of petals on the stem. Allow the other layers to flare out slightly. Keep adding petals until you have reached your desired fullness.
8. Secure the rose on the stem with a small piece of tape under the stem. Using thin strips of duct tape approximately about an inch (2.54 cm) long and a centimeter (0.393 cm) wide, attach the rose bud to the duct tape-covered stem. Make sure the strips are of the same color as the sepal -- the bottom part of the bud.
8. Secure the rose on the stem with a small piece of tape under the stem. Using thin strips of duct tape approximately about an inch (2.54 cm) long and a centimeter (0.393 cm) wide, attach the rose bud to the duct tape-covered stem. Make sure the strips are of the same color as the sepal — the bottom part of the bud.

For a great selection of colored duct tape, metallic duct tape, camo duct tape, and even glow-in-the-dark duct tape, check out jmcremps.com. Be sure to check out our duct tape wallet kit for another fun and functional craft that comes with everything you need to get started. To find more exciting ways to use duct tape, check out our e-book series called Warfare by Duct Tape.  The easy-to-follow instructions will allow any creative kid (or adult) to create swords, armor, shields, and more!

The instructional portion of this article was provided by wikihow, a wiki building the world’s largest, highest quality how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Make a Duct Tape Rose. Content on wikiHow can be shared under a Creative Commons License.

 

 

 

 

Advertisement

Duct Tape Project – How to Make a Duct Tape Wallet with Pockets

jmcrempsLeave a comment

Here’s a new twist on the classic Duck Tape Wallet.  By adding a few pockets inside the wallet, the challenge and fun of making this duct tape creation is brought to a whole new level.

This Duct Tape Wallet with pockets is an exciting new twist on everyone's favorite duct tape project.
This Duct Tape Wallet with pockets is an exciting new twist on everyone’s favorite duct tape project.

Project level:  Intermediate (prior experience with duct tape projects is essential in making this project.  For a beginner version of a Duct Tape Wallet, click here.)

Supplies needed

Step 1 Make a duct tape fabric piece approximately 8 inches wide and 7 inches tall.
Step 1 – Make a duct tape fabric piece as shown above.
Fold up your fabric and tape the sides to form your pocket.
Step 2 – Fold up your fabric and tape the sides to form your pocket.
Step 3 Make a smaller fabric that is about 2 in. wide and 3 in. long. Make 6 of these.
Step 3 – Make a smaller fabric that is about 2 in. wide and 3 in. long. Make 6 of these.
Step 4 - 4 Step 4 Make 2 smaller pieces of fabric that are the same size as the ones above. Cut out a triangle from the top of each fabric.
Step 4 – Make 2 smaller pieces of fabric that are the same size as the ones above. Cut out a triangle from the top of each fabric.
Step 5 - Add your cut outs from step 4 to 2 of the fabrics from step 3. Add a strip of duct tape to the top of the other 4 pieces of fabric.
Step 5 – Add your cut outs from step 4 to 2 of the fabrics from step 3. Add a strip of duct tape to the top of the other 4 pieces of fabric.
Step 6 - Attach each fabric to the inside of your wallet, with the pockets on the bottom.
Step 6 – Attach each fabric to the inside of your wallet, with the pockets on the bottom.
Step 7 - Add a strip of tape to the bottom of each pocket.
Step 7 – Add a strip of tape to the bottom of each pocket. Now you’re done! Enjoy your new Duck Tape Wallet with pockets.

This project is courtesy of Duck Tape® Brand Creations and can be found at http://www.duckbrand.com.  You can find a great selection of colored duct tape, metallic duck tape, camo duck tape, and even glow-in-the-dark duck tape at jmcremps.com.  If you want even more fascinating and fun Duct Tape Projects, check out our e-book series called Warfare by Duct Tape.  The easy-to-follow instructions will allow any creative kid (or adult) to create swords, armor, shields, and more!

Get Them Excited for School with This Duct Tape Creation

jmcrempsLeave a comment

The end of summer is creeping up and school days are right around the corner.  Back to school can bring conflict to an otherwise happy household – children who do not want to go back to school on one hand, and Mom’s who are slightly relieved at the return to a routine on the other.  It can be a real challenge to get the kids on Mom’s side of the back-to-school equation. One way to do so, besides outright bribery, is to let them customize some of their back to school supplies.  This simple yet fun Duck Tape project is a great way to get them engaged in back-to-school fun.

STEP 1: Cut the zipper part off your sandwich bag. Leave about ½ inch of bag attached to the zipper part. Do not throw away the rest of the bag.
STEP 1  –  Cut the zipper part off your sandwich bag. Leave about ½ inch of bag attached to the zipper part. Do not throw away the rest of the bag.
STEP 2: Make 2 pieces of Duck Tape® fabric that measure as wide as your bag and 4 in. tall.
STEP 2  –  Make 2 pieces of Duck Tape® fabric that measure as wide as your bag and 4 in. tall.
STEP 3 - Using a strip of Duck Tape®, adhere the piece of Duck Tape® fabric you made in step 2 to the zipper from step 1. Repeat for the other side with your second piece of Duck Tape® fabric.
STEP 3 – Using a strip of Duck Tape®, adhere theof Duck Tape® fabric you made in step 2 to the zipper from step 1. Repeat for the other side with your second piece of Duck Tape® fabric.
STEP 5 - For the I.D. holder cut a rectangle out of the remaining plastic bag that measures 2.5 in. tall by 4 in. wide.
STEP 5 – For the I.D. holder cut a rectangle out of the remaining plastic bag that measures 2.5 in. tall by 4 in. wide.
Fold a single piece of Duck Tape® over each of the open edges of the supply case to close them up. Trim any excess tape.
Step 4 – Fold a single piece of Duck Tape® over each of the open edges of the supply case to close them up. Trim any excess tape.
STEP 6 - Cut a piece of Duck Tape® that measures 1 in. tall and 4 in. wide and fold it over the top of the plastic rectangle from step 5. Use 3 more pieces on the sides and bottom to attach it to your case, keeping the top open.
STEP 6 – Cut a piece of Duck Tape® that measures 1 in. tall and 4 in. wide and fold it over the top of the plastic rectangle from step 5. Use 3 more pieces on the sides and bottom to attach it to your case, keeping the top open.
STEP 7 - If desired, adhere 3 more strips of a different color Duck Tape®, leaving a littly of the previous color Duck Tape® showing. Trim any excess.
STEP 7 – If desired, adhere 3 more strips of a different color Duck Tape®, leaving a littly of the previous color Duck Tape® showing. Trim any excess.
STEP 8 - Create a tab to add to your supply case by cutting off a 5 in. long piece of Duck Tape®and folding it over on to itself lengthwise.
STEP 8 – Create a tab to add to your supply case by cutting off a 5 in. long piece of Duck Tape® and folding it over on to itself lengthwise.
STEP 9 - Cut a 1 in. slit in the side of your supply case with a craft knife and insert the tab. Use a small piece of tape on the inside to hold the tab in place.
STEP 9 – Cut a 1 in. slit in the side of your supply case with a craft knife and insert the tab. Use a small piece of tape on the inside to hold the tab in place.

This project is courtesy of Duck Tape® Brand Creations and can be found at http://www.duckbrand.com.  You can find a great selection of colored duct tape, metallic duck tape, camo duck tape, patterned duck tape, and even glow-in-the-dark duck tape at jmcremps.com.  If you want even more fascinating and fun Duct Tape Projects, check out our e-book series called Warfare by Duct Tape.  The easy-to-follow instructions will allow any creative kid (or adult) to create swords, armor, shields, and more!